![](https://52fbadf4f2.clvaw-cdnwnd.com/f5f8310aae27e1aab89dfd077eacf669/200000030-c9f1dc9f20/FIRTAS-BETTERCUT_Model%20FP-1650B_2.jpg?ph=52fbadf4f2)
FIRTAS-BETTERCUT Model FP-1060ET
BETTERCUT FP-1060ET
![](https://52fbadf4f2.clvaw-cdnwnd.com/f5f8310aae27e1aab89dfd077eacf669/200000854-006490064b/FIRTAS%20BETTERCUT%20FP-1060ET_Picture%2002.jpeg?ph=52fbadf4f2)
"BETTERCUT" FP-1060ET is high speed automatic hot foil stamping and die-cutting machine, this is our company's hot sale product, it can run large format die-cutting as well as stamping with 3 longitudinal and 2 transverse foil pull system. Very suitable for high-end printing products, such as cigarette boxes, wine boxes, gift boxes and other new masterpiece launched in the field of stamping. With 1.080 mm paper size and 7.500 sheets/hour maximum working speed, the machine is equipped with vertical and horizontal two-way foil feeding system as standard, bringing you higher production efficiency and lower production cost.
![](https://52fbadf4f2.clvaw-cdnwnd.com/f5f8310aae27e1aab89dfd077eacf669/200000870-f0d0bf0d0c/FIRTAS%20BETTERCUT%20FP-1060ET_Picture%2003.jpeg?ph=52fbadf4f2)
BETTERCUT FP-1060ET / Specification:
Machine type: FP-1060ET
Maximum sheet size: 1.060 x 760 mm
Minimum sheet size: 400 x 360 mm
Maximum hot stamping size: 1.050 x 750 mm
Maximum die-cutting size: 1.050 x 750 mm
Maximum die-cutting speed: 8.000 S/H
Maximum stamping speed: 6.500 S/H
Maximum operating speed: ±0.10 mm
Rated voltage: 380 ± 5% VAC
Maximum working pressure: 450 KN
Use compressed air: ≧ 0.25 ㎡/min ≧ 0.6 mpa
Stack height: 1.600 mm
Pressure adjustment height range: 2 mm
Cut line height: 23.8 mm
Machinable paper thickness: 0,1 - 2 mm solid board & 4 mm corrugated board
Hot stamping and foil mode: 3 Longitudinal & 2 Transverse
Main motor: 11 KW
Host total power: 16,7 KW
Hot stamping heating power: 24 KW
Dimensions: 6.200 x 2.500 x 2.750 mm (Without platform)
Dimensions: 7.500 x 3.705 x 2.150 mm (Including platform)
In order to send you our price offer, please do not hesitate to fill in the form below: